Call me! Click here to send us a message

Click the number:5116 Entry time:2015/1/31 【Print this page】 【Close

Defluorinating Agent

Defluorinating Agent

Activated Alumina Defluorinating Agent

中文名:活性氧化铝脱氟剂

Molecular formula: Al2O3·nH2O  (0<n<3)

Molecular Weight: 101.96 + nH2O

Yuanying activated alumina defluorinating agent has high defluorination capacity, and it is non-toxic, tasteless, odorless, insoluble in water and organic solvents.

Widely used for fluoride removal in high fluoride area, cyclic alkanes defluorinating agent among alkylbenzene production. This product can also be used for dearsenification, wastewater decolorizing, deodorizing, etc.

Specification

Item

Unit

Index

Αl2O3

%

≥92

≥92

SiO2

%

≤0.10

≤0.10

Fe2O3

%

≤0.04

≤0.04

2O

%

≤0.45

≤0.45

Loss on ignition

%

≤7.0

≤7.0

Bulk density

g/ml

0.70-0.80

0.70-0.80

Specific surface

m2/g

≥300

≥300

Pore volume

ml/g

≥0.40

≥0.40

Static absorption

%

17±1

17±1

Water absorption

%

≥50

≥50

Crush strength

N/p

≥60 (1-2mm)

≥100 (2-3mm)

Abrasion loss

%

≤0.10

≤0.10

Defluorination

mgF/g 

2.5-3.0

2.5-3.0

Note: size can be manufactured in accordance with client’s requirement, such as 1-12mm.

Packing

25kg/bag, 150kg/steel drum, 800kg/jumbo bag

Introduction

Activated alumina defluorinating agent is white spherical porous particles, uniform particle size, smooth surface, high mechanical strength, hygroscopicity strong, does not crack and inflate after absorbing water.

Fluorine is one of the trace element necessary for animal and human. Adult normal daily intake should be 2~3 mg, too much or too little can lead to disease, so defluorination is important in drinking water. Activated alumina has good strength, good abrasion resistance, long service life, stable performance, high defluorination capacity, after defluorination the water quality accords with national health standards, so activated alumina is one of the indispensable material in water treatment.

Activated alumina defluorinating agent has amphoteric adsorption properties, by regulating the PH value of aqueous solution, anions in aqueous solution can be detached. Defluorinating equipment is similar to ion exchanger, in order to obtain high defluorination capacity, need to lower PH value, while the PH value is 5.5, activated alumina adsorption rate of fluorine is the largest. In order to meet the quality requirement and control corrosion, PH values should be slightly acidic. Activated alumina defluorination is similar to the anion exchange resin, but the selectivity for fluoride ion is larger than the anion resin.

Smaller particle size can increase specific surface area, make a fully contact between activated alumina and water. For example, commonly used 1-3 mm, 0.4-1.2 mm, their specific surface area are generally more than 320 m2/g. High specific surface area means huge number of micropore, it can ensure a strong adsorption of fluoride ion in water. When raw water PH value and alkalinity is lower, defluorination capacity of activated alumina is higher, fluoride absorption of per cubic meter activated alumina is 6400 grams, fluoride absorption capacity is greater than 4.0mg/g, and the price is lower than synthetic resin.